2
2
5
5
Firmware Upgrade: To update the device firmware, enter the
firmware path and password (if necessary), and click “Start”.)
Figure 12 – Firmware Upgrade
Web Access: Double click the device in the Monitor List or select a
device in the Monitor List and press the “Web Access” button to open
the Web-based Utility. To see the list of web browsers the Web-based
Utility supports, see Supported web browsers on page 18.
DHCP Refresh: select a device in the Monitor List and press the
“DHCP Refresh”, and enter the password (if applicable) to trigger
the Web-Smart Switch to request an IP address from a DHCP Server.
Figure 13 – DHCP Refresh
To Next Page
Loading...
