xStack DGS-3400 Series Fast Ethernet Switch
Section 5
Web-based Switch Configuration
Introduction
Logging on to the Web Manager
Web-Based User Interface
Basic Setup
Reboot
Basic Switch Setup
Network Management
Switch Utilities
Network Monitoring
IGMP Snooping Status
Introduction
All software functions of the xStack DGS-3400 switch series can be managed, configured and monitored via the embedded
web-based (HTML) interface. Manage the Switch from remote stations anywhere on the network through a standard
browser. The browser acts as a universal access tool and can communicate directly with the Switch using the HTTP
protocol.
The Web-based management module and the Console program (and Telnet) are different ways to access the same internal
switching software and configure it. Thus, all settings encountered in web-based management are the same as those found
in the console program.
26
To Next Page
Loading...
