xStack DGS-3400 Series Fast Ethernet Switch
Single IP Management Configuration File Backup/Restore
The Commander Switch can instruct configuration file backup and restore to the Member Switch using a TFTP server.
Member Switches will be listed in the table and will be specified by Port (port on the CS where the MS resides), MAC
Address, Model Name and Version. To specify a certain Switch for upgrading configuration files, click its corresponding
radio button under the Port heading. To update the configuration file, enter the Server IP Address where the file resides
and enter the Path/Filename of the configuration file. Click Download to initiate the file transfer from a TFTP server to
the Switch. Click Upload to backup the configuration file to a TFTP server.
Figure 6- 65. Single IP Management Configuration File Backup and Restore
Single IP Management Log Files
The Commander Switch can order a log file from a member switch sent to a server. Provide the Server IP address for
storing the log and the log file path and filename on the member switch. Click Upload to send the log file to a TFTP
server.
Figure 6- 66. Single IP Management Upload Log menu
79
To Next Page
Loading...
