xStack DGS-3400 Series Fast Ethernet Switch
MAC Notification Settings
MAC Notification is used to monitor MAC addresses
learned and entered into the forwarding database. To
globally set MAC notification on the Switch, open
the following window by opening the MAC
Notification Settings in the Administration folder.
Figure 6- 15. MAC Notification Settings
Global Settings
The following parameters may be viewed and modified:
Parameter Description
State
Enable or disable MAC notification globally on the Switch
Interval (sec)
The time in seconds between notifications.
History size
The maximum number of entries listed in the history log used for notification.
Up to 500 entries can be specified.
Port Settings
To change MAC notification settings for a port or group of ports on the Switch, configure the following parameters.
Parameter Description
From…To
Select a port or group of ports to enable for MAC notification using the pull-
down menus.
State
Enable MAC Notification for the ports selected using the pull-down menu.
Click Apply to implement changes made.
45
To Next Page
Loading...
