D-Link DGS-3620-52P - Page 1010

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1005
DGS-3620-28SC:admin#delete subnet_vlan network 172.168.1.1/24
Command: delete subnet_vlan network 172.168.1.1/24
Success.
DGS-3620-28SC:admin#
To delete all subnet VLAN entries:
DGS-3620-28SC:admin#delete subnet_vlan all
Command: delete subnet_vlan all
Success.
DGS-3620-28SC:admin#
96-3 show subnet_vlan
Description
This command is used to display a subnet VLAN.
Format
show subnet_vlan {[network <network_address> | ipv6network <ipv6networkaddr> | vlan
<vlan_name 32> | vlanid <vidlist>]}
Parameters
network - (Optional) Specify an IPv4 network address.
<network_address> - Specify an IPv4 network address. The format is ipaddress/prefix
length.
ipv6network - (Optional) Specify an IPv6 network address.
<ipv6networkaddr> - Specify an IPv6 network address. The format is ipaddress/prefix length.
vlan - (Optional) Specify to display all subnet VLAN entries associated with this VLAN.
<vlan_name 32> - Specify a VLAN name. The maximum length is 32 characters.
vlanid - (Optional) Specify a list of VLANs by VLAN ID.
<vidlist> - Specify the VLAN ID.
Note: If no parameter is specified, all subnet VLAN information will be displayed.
Restrictions
None.
Example
To display a specified subnet VLAN entry:
DGS-3620-28SC:admin#show subnet_vlan network 172.168.1.1/24
Command: show subnet_vlan network 172.168.1.1/24