D-Link DGS-3620-52P - Show Bgp Dampening

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
163
IP Address/Netmask Gateway Metric LocPrf Weight Path
*> 20.0.0.0/8 0.0.0.0 0 32768 i
*> 221.221.2.0/24 0.0.0.0 0 32768 i
*d 221.221.252.0/24 1.1.1.2 1 40 i
*d 221.221.253.0/24 1.1.1.2 1 40 i
Total Entries: 4
DGS-3620-28SC:admin# config bgp dampening state disable
Command: config bgp dampening state disable
Success.
DGS-3620-28SC:admin# show bgp route
Command: show bgp route
BGP Local Router ID is 20.90.90.90
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
IP Address/Netmask Gateway Metric LocPrf Weight Path
*> 20.0.0.0/8 0.0.0.0 0 32768 i
*> 221.221.2.0/24 0.0.0.0 0 32768 i
* 221.221.252.0/24 1.1.1.2 1 40 i
* 221.221.253.0/24 1.1.1.2 1 40 i
Total Entries: 4
DGS-3620-28SC:admin#
12-18 show bgp dampening
Description
This command is used to show the BGP dampening configurations.
Format
show bgp dampening
Parameters
None.
Restrictions
None. (EI Mode Only Command)