D-Link DGS-3620-52P - Show Lldp Statistics; Show Lldp Statistics Ports

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
622
53-20 show lldp statistics
Description
This command is used to display an overview of neighbor detection activity on the switch.
Format
show lldp statistics
Parameters
None.
Restrictions
None.
Example
To display LLDP statistics:
DGS-3620-28SC:admin#show lldp statistics
Command: show lldp statistics
Last Change Time : 3648
Number of Table Insert : 0
Number of Table Delete : 0
Number of Table Drop : 0
Number of Table Ageout : 0
DGS-3620-28SC:admin#
53-21 show lldp statistics ports
Description
This command is used to display LLDP statistic information for individual ports.
Format
show lldp statistics ports {<portlist>}
Parameters
<portlist> - (Optional) Specify the ports to be displayed.
Note: When a port list is not specified, information for all ports will be displayed.