D-Link DGS-3620-52P - Delete Cfm MD; Enable Cfm

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
221
Success.
DGS-3620-28SC:admin#
15-9 delete cfm md
Description
This command is used to delete a previously created maintenance domain. When the command is
executing, all the MEPs and maintenance associations created in the maintenance domain will be
deleted automatically.
Format
delete cfm md [<string 22> | md_index <uint 1-4294967295>]
Parameters
<string 22> - Specify the maintenance domain name. The maximum length is 22 characters.
md_index - Specify the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be
between 1 and 4294967295.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To delete a previously created maintenance domain:
DGS-3620-28SC:admin#delete cfm md op_domain
Command: delete cfm md op_domain
Success.
DGS-3620-28SC:admin#
15-10 enable cfm
Description
This command is used to enable the CFM globally.
Format
enable cfm