D-Link DGS-3620-52P - Disable Loopdetect

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
626
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable loop detection:
DGS-3620-28SC:admin#enable loopdetect
Command: enable loopdetect
Success.
DGS-3620-28SC:admin#
54-4 disable loopdetect
Description
This command allows the loop detection function to be globally disabled on the switch. The default
value is disabled.
Format
disable loopdetect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable loop detection:
DGS-3620-28SC:admin#disable loopdetect
Command: disable loopdetect
Success.
DGS-3620-28SC:admin#