D-Link DGS-3620-52P - Page 1025

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1020
Success.
DGS-3620-28SC:admin#
99-2 show system_severity
Description
This command is used to show the severity level control for a system.
Format
show system_severity
Parameters
None.
Restrictions
None.
Example
To show the severity level control for a system:
DGS-3620-28SC:admin#show system_severity
Command: show system_severity
System Severity Trap : warning
System Severity Log : information
DGS-3620-28SC:admin#