D-Link DGS-3620-52P - Page 1051

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1046
#
# Firmware: Build 2.00.015
# Copyright(C) 2012 D-Link Corporation. All rights reserved.
#-----------------------------------------------------------------------------
# STACK
config stacking force_master_role state disable
# DEVICE
config temperature threshold high 79
config temperature threshold low 11
config temperature trap state enable
config temperature log state enable
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
103-12 show boot_file
Description
This command is used to display the configuration file and firmware image assigned as boot up
files.
Format
show boot_file
Parameters
None.
Restrictions
None.
Example
To display the configuration file and firmware image assigned as a boot up file:
DGS-3620-28SC:admin#show boot_file
Command: show boot_file
Bootup Firmware : c:/runtime.had
Bootup Configuration : c:/config.cfg
DGS-3620-28SC:admin#