xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1067
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure voice VLAN ports 4 to 6 to enable:
DGS-3620-28SC:admin#config voice_vlan ports 4-6 state enable
Command: config voice_vlan ports 4-6 state enable
Success.
DGS-3620-28SC:admin#
To set voice VLAN ports 4 to 6 to auto mode:
DGS-3620-28SC:admin#config voice_vlan ports 4-6 mode auto
Command: config voice_vlan ports 4-6 mode auto
Success.
DGS-3620-28SC:admin#
105-6 config voice_vlan log state
Description
This command is used to configure the voice VLAN log state.
Format
config voice_vlan log state [enable | disable]
Parameters
enable - Specify to enable the voice VLAN log state.
disable - Specify to disable the voice VLAN log state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the voice VLAN log state:
DGS-3620-28SC:admin#config voice_vlan log state enable
Command: config voice_vlan log state enable
Success.
DGS-3620-28SC:admin#
To Next Page
Loading...
