D-Link DGS-3620-52P - Page 1116

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1111
Parameters description:
None
Event description: A host has passed the authentication.
Log Message: MAC-based Access Control host login successful
(MAC: <macaddr>, port: <[unitID]portNum>, VID: <vid>)
Parameters description:
macaddr: The MAC address.
unitID: The unit ID.
portNum: The port number.
vid: The VLAN ID on which the host exists.
Informational
Event description: A host has aged out.
Log Message: MAC-based Access Control host aged out (MAC:
<macaddr>, port: <[unitID]portNum>, VID: <vid>)
Parameters description:
macaddr: The MAC address
unitID: The unit ID.
portNum: The port number.
vid: The VLAN ID on which the host exists.
Informational
PTP
Event description: PTP port role changed
Log Message: PTP port <[unitID:]portNum> role changed to
<ptp_role>.
Parameters description:
unitID: The unit ID.
portNum: The port number.
ptp_role: The PTP role of the port.
Informational
Event description: PTP clock synchronized
Log Message: The boundary clock synchronized to its master,
the offset value is <+|-><Offset> second(s).
Parameters description:
Offset: The value of the offset between the slave and master.
Informational
Only when the
synchronized
more than one
second, this log
message will be
send.
DHCPv6
Client
Event description: DHCPv6 client interface administrator state
changed.
Log Message: DHCPv6 client on interface <ipif-name> changed
state to [enabled | disabled].
Parameters description:
<ipif-name>: Name of the DHCPv6 client interface.
Informational
Event description: DHCPv6 client obtains an ipv6 address from
a DHCPv6 server.
Informational