xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1117
Parameters description:
UnitID: Represent the id of the device in the stacking system.
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware upgrade was unsuccessful.
Log Message: [TFTP(2):] [Unit <unitID>,] Firmware upgrade by
<session> was unsuccessful! (Username: <username>, IP:
<ipaddr>, MAC: <macaddr>)
Parameters description:
UnitID: Represent the id of the device in the stacking system.
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware successfully uploaded.
Log Message: [TFTP(3):]Firmware successfully uploaded by
<session> (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware upload was unsuccessful.
Log Message: [TFTP(4):]Firmware upload by <session> was
unsuccessful! (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
Event description: Configuration successfully downloaded.
Log Message: [TFTP(5):]Configuration successfully downloaded
by <session> (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
To Next Page
Loading...
