xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1120
address as our device.
unitID: 1.Interger value;2.Represent the id of the device in the
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of
the device.
ipif_name: The name of the interface of the switch which has the
conflic IP address.
Event description: Successful login through Telnet.
Log Message: Successful login through Telnet (Username:
<username>, IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Event description: Login failed through Telnet.
Log Message: Login failed through Telnet (Username:
<username>, IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Event description: Logout through Telnet.
Log Message: Logout through Telnet (Username: <username>,
IP: <ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Event description: Telnet session timed out.
Log Message: Telnet session timed out (Username: <username>,
IP: <ipaddr>).
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Event description: Port link up.
Log Message: Port <[unitID:]portNum> link up, <link state>
Parameters description:
unitID: 1.Interger value;2.Represent the id of the device in the
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of
the device.
link state: for ex: , 100Mbps FULL duplex
Event description: Port link down.
To Next Page
Loading...
