D-Link DGS-3620-52P - Page 1149

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1144
CFM
Event description: Cross-connect is detected
Log Message: CFM cross-connect. VLAN:<vlanid>, Local(MD
Level:<mdlevel>, Port <[unitID:]portNum>,
Direction:<mepdirection>) Remote(MEPID:<mepid>,
MAC:<macaddr>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
unitID: Represents the ID of the device in the stacking system.
portNum: Represents the logical port number of the MEP.
mepdirection: Can be "inward" or "outward".
mepid: Represents the MEPID of the MEP. The value 0 means
unknown MEPID.
macaddr: Represents the MAC address of the MEP. The value all
zeros mean unknown MAC address.
Note: In CFM hardware mode, remote MEP information (mepid
and macaddr) is unknown.
Critical
Event description: Error CFM CCM packet is detected
Log Message: CFM error ccm. MD Level:<mdlevel>,
VLAN:<vlanid>, Local(Port <[unitID:]portNum>,
Direction:<mepdirection>) Remote(MEPID:<mepid>,
MAC:<macaddr>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents MD level of the MEP.
unitID: Represents the ID of the device in the stacking system.
portNum: Represents the logical port number of the MEP.
mepdirection: Can be "inward" or "outward".
mepid: Represents the MEPID of the MEP. The value 0 means
unknown MEPID.
macaddr: Represents the MAC address of the MEP. The value all
zeros means unknown MAC address.
Note: In CFM hardware mode, remote MEP information (mepid
and macaddr) is unknown.
Warning
Event description: Can not receive the remote MEP's CCM
packet
Log Message: CFM remote down. MD Level:<mdlevel>,
VLAN:<vlanid>, Local(Port <[unitID:]portNum>,
Direction:<mepdirection>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
Warning