D-Link DGS-3620-52P - Page 1159

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1154
whose authentication key or
authentication type conflicts with this
router's authentication key or
authentication type. Implementation of this
trap is optional.
Binding objects:
(1) vrrpTrapPacketSrc
(2) vrrpTrapAuthErrorType
Port Security
swL2PortSecurityViolationTrap
When the port security trap is enabled,
new MAC addresses that violate the pre-
defined port security configuration will
trigger trap messages to be sent out.
Binding objects：
(1)swPortSecPortIndex
(2)swL2PortSecurityViolationMac
1.3.6.1.4.1.171.11.118.
X.2.100.1.2.0.2
(X: module ID)
Safe Guard
swSafeGuardChgToNormal
This trap indicates system change
operation mode from axhausted to
normal.
Binding objects:
(1) swSafeGuardCurrentStatus
1.3.6.1.4.1.171.12.19.
4.1.0.2
swSafeGuardChgToExhausted
This trap indicates System change
operation mode from normal to
exhausted.
Binding objects:
(1) swSafeGuardCurrentStatus
1.3.6.1.4.1.171.12.19.
4.1.0.1
LBD
swPortLoopOccurred
The trap is sent when a port loop occurs.
Binding objects:
(1) swLoopDetectPortIndex
1.3.6.1.4.1.171.12.41.
10.0.1
swPortLoopRestart
The trap is sent when a port loop
restarts after the interval time.
Binding objects:
(1) swLoopDetectPortIndex
1.3.6.1.4.1.171.12.41.
10.0.2
swVlanLoopOccurred
The trap is sent when a port loop occurs
under LBD VLAN-based mode.
Binding objects:
(1) swLoopDetectPortIndex
(2) swVlanLoopDetectVID
1.3.6.1.4.1.171.12.41.
10.0.3