D-Link DGS-3620-52P - Page 151

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
146
all - All of the IP interfaces.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the automatic configuration of link local address for an interface:
DGS-3620-28SC:admin#disable ipif_ipv6_link_local_auto interface1
Command: disable ipif_ipv6_link_local_auto interface1
Success.
DGS-3620-28SC:admin#
11-11 show ipif_ipv6_link_local_auto
Description
This command is used to display the link local address automatic configuration state.
Format
show ipif_ipv6_link_local_auto {<ipif_name 12>}
Parameters
<ipif_name 12> - (Optional) The name of the interface.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display the link local address automatic configuration state:
DGS-3620-28SC:admin#show ipif_ipv6_link_local_auto
Command: show ipif_ipv6_link_local_auto
IPIF: System Automatic Link Local Address: Disabled
DGS-3620-28SC:admin#