D-Link DGS-3620-52P - Page 202

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
197
local AS number : 100
Dampening : Enabled
BGP AS Path Entries : 10
BGP Community Entries : 7
Neighbor Ver AS MsgRcvd MsgSent Up/Down State/PfxRcvd
----------- --- -- ------- ------- ------- -------------
10.100.1.1 4 200 26 22 00:14:23 23
10.200.1.1 4 300 21 51 00:13:40 0
10.200.1.5 4 300 21 5 00:10:05 Idle
Total Number of Neighbors:3
DGS-3620-28SC:admin#
12-49 show bgp reflection
Description
This command is used to display the route reflection configuration of BGP.
Format
show bgp reflection
Parameters
None.
Restrictions
None. (EI Mode Only Command)
Example
This example displays the BGP reflection setting:
DGS-3620-28SC:admin# show bgp reflection
Command: show bgp reflection
Client to Client Reflection State : Disabled
Cluster ID : 0.0.0.0
Router Reflector Client:
10.1.1.20
10.1.1.30
DGS-3620-28SC:admin#