D-Link DGS-3620-52P - Page 238

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
233
Parameters
None. (EI Mode Only Command)
Restrictions
None.
Example
To display the MIP CCM database entries:
DGS-3620-28SC:admin#show cfm mipccm
Command: show cfm mipccm
MA VID MAC Address Port
------------------------ ---- -------------------- -------
opma 1 XX-XX-XX-XX-XX-XX-XX 2
opma 1 XX-XX-XX-XX-XX-XX-XX 3
Total: 2
DGS-3620-28SC:admin#
15-24 show cfm mp_ltr_all
Description
This command is used to display the current configuration of the "all MPs reply LTRs" function.
This command is for test purposes.
Format
show cfm mp_ltr_all
Parameters
None.
Restrictions
None. (EI Mode Only Command)
Example
To display the configuration of the all-MPs-reply-to-LTR function:
DGS-3620-28SC:admin#show cfm mp_ltr_all
Command: show cfm mp_ltr_all
All MPs reply LTRs: Disabled