xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
282
Restrictions
Only Administrator level users can issue this command.
Example
To clear all OSPF statistic counters:
DGS-3620-28SC:admin# debug ospf clear counter
Command: debug ospf clear counter
Success.
DGS-3620-28SC:admin#
20-17 debug ospf log state
Description
This command is used to enable or disable the OSPF debug log.
Format
debug ospf log state [enable | disable]
Parameters
state - Specifies the state of the OSPF debug log.
enable - Specifies that the OSPF debug log state will be enabled.
disable - Specifies that the OSPF debug log state will be disabled.
Restrictions
Only Administrator level users can issue this command.
Example
To enable the OSPF debug log:
DGS-3620-28SC:admin# debug ospf log state enable
Command: debug ospf log state enable
Success.
DGS-3620-28SC:admin#
20-18 debug ospf show counter
Description
This command is used to display OSPF statistic counters.
To Next Page
Loading...
