D-Link DGS-3620-52P - Page 330

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
325
Format
debug pim ssm
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the PIM-SSM debug function:
DGS-3620-28SC:admin# debug pim ssm
Command: debug pim ssm
Success.
DGS-3620-28SC:admin#
Once the PIM-SSM debug enabled, the debug information maybe outputted.
DGS-3620-28SC:admin# Group Record mode 2 for SSM group 232.1.1.1 from
192.168.2.14, ignored
Output truncated...
20-69 no debug pim ssm
Description
This command is used to disable the PIM-SSM debug function.
Format
no debug pim ssm
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.