D-Link DGS-3620-52P - Page 517

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
512
Total Entries: 1
DGS-3620-28SC:admin#
43-7 enable ecmp ospf
Description
This command is used to activate the OSPF ECMP function.
Format
enable ecmp ospf
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the OSPF ECMP function:
DGS-3620-28SC:admin# enable ecmp ospf
Command: enable ecmp ospf
Success.
DGS-3620-28SC:admin#
43-8 disable ecmp ospf
Description
This command is used to disable the OSPF ECMP function.
Format
disable ecmp ospf
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.