D-Link DGS-3620-52P - Page 519

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
514
43-10 show ecmp algorithm
Description
This command is used to display the ECMP related settings.
Format
show ecmp algorithm
Parameters
None.
Restrictions
None.
Example
To show current ECMP related settings:
DGS-3620-28SC:admin#show ecmp algorithm
Command: show ecmp algorithm
ECMP for OSPF : Enabled
ECMP Load Balance Algorithm :
Destination IP : used.
Source IP : not used.
CRC_Low : used.
CRC_High : not used.
TCP_UDP_Port : not used.
DGS-3620-28SC:admin#