xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
542
46-11 enable address_binding trap_log
Description
This command is used to send trap and log messages when an address binding module detects
illegal IP and MAC addresses.
Format
enable address_binding trap_log
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the address binding trap and log:
46-12 disable address_binding trap_log
Description
This command is used to disable address binding trap logs.
Format
disable address_binding trap_log
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the address binding trap and log:
To Next Page
Loading...
