D-Link DGS-3620-52P - Page 586

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
581
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Note: If no parameter is specified, the system will display current LACP mode for all
ports.
Restrictions
None.
Example
To display the current LACP mode for ports 1 to 3 on the switch:
DGS-3620-28SC:admin#show lacp_port 1-3
Command: show lacp_port 1-3
Port Activity
------ --------
1 Active
2 Active
3 Active
DGS-3620-28SC:admin#