D-Link DGS-3620-52P - Page 621

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
616
DGS-3620-28SC:admin#
53-14 show lldp_med
Description
This command is used to display the switch’s general LLDP-MED configuration status.
Format
show lldp_med
Parameters
None.
Restrictions
None.
Example
To display the switch’s general LLDP-MED configuration status:
DGS-3620-28SC:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class : Network Connectivity Device
Hardware Revision : A1
Firmware Revision : 1.00.012
Software Revision : 1.00.034
Serial Number : D1234567890
Manufacturer Name : D-Link
Model Name : DGS-3620-28SC Gigabit Ethernet S
Asset ID :
PoE Device Type : PSE Device
PoE PSE Power Source : Primary
LLDP-MED Configuration:
Fast Start Repeat Count : 4
LLDP-MED Log State:Disabled
DGS-3620-28SC:admin#