xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
714
<network_address> - Specify the network address of the trusted network. The form of
network address is xxx.xxx.xxx.xxx/y.
ipv6_prefix - Specify the IPv6 network address of the trusted network.
<ipv6networkaddr> - Specify the IPv6 network address of the trusted network.
all - Specify that all trusted hosts will be deleted.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete a trusted host:
DGS-3620-28SC:admin#delete trusted_host ipaddr 10.48.74.121
Command: delete trusted_host ipaddr 10.48.74.121
Success.
DGS-3620-28SC:admin#
66-6 show trusted_host
Description
This command is used to display the trusted hosts.
Format
show trusted_host
Parameters
None.
Restrictions
None.
Example
To display trusted hosts:
DGS-3620-28SC:admin#show trusted_host
Command: show trusted_host
Management Stations
IP Address Access Interface
----------------------------------------------------------------------------
10.48.93.100
10.51.17.1
To Next Page
Loading...
