xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
742
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the syslog source IP interface:
DGS-3620-28SC:admin#config syslog source_ipif Sysetm
Command: config syslog source_ipif System
Success.
DGS-3620-28SC:admin#
To clear the configured source IP interface for syslog:
DGS-3620-28SC:admin#config syslog source_ipif none
Command: config syslog source_ipif none
Success.
DGS-3620-28SC:admin#
67-20 show syslog source_ipif
Description
This command is used to display the syslog source IP interface.
Format
show syslog source_ipif
Parameters
None.
Restrictions
None.
Example
To display the syslog source interface:
DGS-3620-28SC:admin#show syslog source_ipif
Command: show syslog source_ipif
Syslog Source IP Interface Configuration:
IP Interface : System
IPv4 Address : None
To Next Page
Loading...
