D-Link DGS-3620-52P - Page 969

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
964
89-22 show community_encryption
Description
This command is used to display the encryption state on the SNMP community string.
Format
show community_encryption
Parameters
None.
Restrictions
None.
Example
To show the encryption state on the SNMP community string:
DGS-3620-28SC:admin# show community_encryption
Command: show community_encryption
SNMP Community Encryption State : Enabled
DGS-3620-28SC:admin#