xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
993
Format
config stacking force_master_role state [enable | disable]
Parameters
enable - Specifies that the Switch's Stacking Force Master Role state will be enabled.
disable - Specifies that the Switch's Stacking Force Master Role state will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable stacking force master role state:
DGS-3620-28SC:admin# config stacking force_master_role state enable
Command: config stacking force_master_role state enable
Success.
DGS-3620-28SC:admin#
93-3 show stacking_mode
Description
This command displays the current stacking mode.
Format
show stacking_mode
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display stacking mode:
To Next Page
Loading...
