DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual
Configuring via Web-based Interface
LAN
To configure the router's local interface, go to the Connections Setup / LAN page.
IPv4
Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 87. Configuring the local interface. The IPv4 tab. The IP section.
Parameter Description
IP
IP address
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
Subnet mask
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
Device domain name The name of the device attached to its IP address in the local subnet.
Figure 88. Configuring the local interface. The IPv4 tab. The DHCP section.
Page 102 of 215
To Next Page
Loading...
