DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual
Overview
Back Panel
Figure 2. Back panel view.
Port Description
WPS/RESET
A button to set up a wireless connection (the WPS function) and to
restore the factory default settings.
To use the WPS function: with the device turned on, push the button
and release. The WPS LED should start blinking.
To restore the factory defaults: with the device turned on, push the
button, hold it for 10 seconds, and then release the button.
ON/OFF
A button to turn the router on/off.
12V DC IN
Power connector.
USB
A port for connecting a USB device (modem, storage, printer).
INTERNET
A port to connect to a cable or DSL modem or to a private Ethernet
line (it is recommended to use the cable included in the delivery
package).
LAN 1-4
4 Ethernet ports to connect computers or network devices.
The device is also equipped with three external non-detachable Wi-Fi antennas.
Page 15 of 215
To Next Page
Loading...
