DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual
Configuring via Web-based Interface
Creating Dynamic IPv6 or Static IPv6 WAN Connection
To create a connection of the Dynamic IPv6 or Static IPv6 type, click the ADD button on the
Connections Setup / WAN page in the Connections List section. On the opened page, go to
the All Settings tab. Then select the relevant value from the Connection type drop-down list
and specify the needed values.
Figure 63. The page for creating a new Static IPv6 connection. Selecting a connection type.
Parameter Description
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Connection name A name for the connection for easier identification.
Page 75 of 215
To Next Page
Loading...
