DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual
Configuring via Web-based Interface
In the opened window, specify the needed parameters:
Parameter Description
Name Specify a username for access from the SNMP manager.
Authentication protocol
Select a required authentication method from the drop-down list or
leave the None value if authentication is not required.
Password
authentication
Specify a password for user authentication from the SNMP manager.
The field is displayed if the MD5 or SHA value is selected from the
Authentication protocol drop-down list.
Encryption protocol
Select a required encryption method from the drop-down list or
leave the None value if encryption is not required. The list is
displayed if the MD5 or SHA value is selected from the
Authentication protocol drop-down list.
Key encryption
Specify an encryption key for data exchange between the SNMP
agent and SNMP manager. The field is displayed if the DES or AES
value is selected from the Encryption protocol drop-down list.
MIB subtree
Specify a MIB element which will be available to the SNMP
manager.
Click the SAVE button.
To edit a user, select the relevant line in the table. In the opened window, change the needed values
and click the SAVE button.
To remove a user, select the checkbox located to the left of the relevant line in the table and click
the DELETE button.
Page 154 of 215
To Next Page
Loading...
