DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual
Configuring via Web-based Interface
In the opened window, you can specify the following parameters:
Parameter Description
Maximum TTL value
Specify the TTL (Time to live) parameter value. The default value is
30.
Number of probes
The number of attempts to hit an intermediate host.
Wait time A period of waiting for an intermediate host response.
To restore the default field values, click the RESET_SETTINGS button.
After specifying the additional parameters, click the OK button.
To run the check, click the START button. After a while, the results will be displayed on the page.
The additional settings window.
To remove the check result from the page, click the CLEAR button.
Page 203 of 215
To Next Page
Loading...
