DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Gigabit
Router
User Manual
Configuring via Web-based Interface
EasyMesh
On the Wi-Fi / EasyMesh page, you can enable the EasyMesh function. This function is designed
to quickly connect several devices into one transport network for providing high-quality Wi-Fi
coverage in living units of complicated planning or for creating a large temporary Wi-Fi network
for an outdoor event.
A mesh network consists of a main device (the Controller role) and subordinate devices (the Agent
role).
5
Devices connect to each other via wireless or wired connection. The Controller device
enables connection and configuration of other devices of the mesh network, controls the data flow
and the roaming of clients between devices in this network. Agents execute commands from the
Controller device and serve as Wi-Fi access points for subordinate devices.
Figure 116. The Wi-Fi / EasyMesh page.
To activate the EasyMesh function, in the Settings section, move the Enable switch to the right.
The following fields are available on the page:
Parameter Description
Device role
The current role of the device in the mesh network.
5 At present, you can connect up to 6 D-Link devices with EasyMesh support: 1 in the Controller role and 5 in the
Agent role.
Page 141 of 233
To Next Page
Loading...
