DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Gigabit
Router
User Manual
Configuring via Web-based Interface
Remote Access
On the Advanced / Remote Access page, you can configure access to the web-based interface
of the router. By default, the access from external networks to the router is closed. If you need to
allow access to the router from the external network, create relevant rules.
Figure 145. The Advanced / Remote Access page.
To create a new rule, click the ADD button ( ).
Figure 146. The window for adding a rule for remote management.
Page 192 of 233
To Next Page
Loading...
