DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Gigabit
Router
User Manual
Configuring via Web-based Interface
IGMP/MLD
On the Advanced / IGMP/MLD page, you can allow the router to use IGMP and MLD and
specify needed settings.
IGMP and MLD are used for managing multicast traffic (transferring data to a group of
destinations) in IPv4 and IPv6 networks correspondingly. These protocols allow using network
resources for some applications, e.g., for streaming video, more efficiently.
Figure 130. The Advanced / IGMP/MLD page.
The following elements are available on the page:
Parameter Description
IGMP
Enable
Move the switch to the right to enable IGMP.
IGMP version Select a version of IGMP from the drop-down list.
Interface
From the drop-down list, select a connection of the Dynamic IPv4 or
Static IPv4 type for which you need to allow multicast traffic (e.g.
streaming video).
Page 161 of 233
To Next Page
Loading...
