DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Gigabit
Router
User Manual
Configuring via Web-based Interface
To set a schedule for a virtual server, click the Set schedule icon ( ) in the line corresponding
to this server. In the opened window, from the Rule drop-down list, select the Create rule value
to create a new schedule (see the Schedule section, page 202) or select the Select an existing
one value to use the existing one. Existing schedules are displayed in the Rule name drop-down
list.
To enable the virtual server at the time specified in the schedule and disable it at the other time,
select the Enable rule value from the Action drop-down list and click the SAVE button.
To disable the virtual server at the time specified in the schedule and enable it at the other time,
select the Disable rule value from the Action drop-down list and click the SAVE button.
To edit the parameters of an existing server, select the relevant line in the table. On the opened
page, change the needed parameters and click the APPLY button.
To change or delete the schedule for a server, click the Edit schedule icon ( ) in the line
corresponding to this server. In the opened window, change the parameters and click the SAVE
button or click the DELETE FROM SCHEDULE button.
To remove a server, select the checkbox located to the left of the relevant line of the table and click
the DELETE button ( ). Also you can remove a server on the editing page.
Page 183 of 233
To Next Page
Loading...
