DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Gigabit
Router
User Manual
Configuring via Web-based Interface
In order to connect your main device to a wireless ISP (WISP), from the Work mode list, select
the WISP Repeater value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and
5GHz bands, and set your own password for access to the web-based interface of the device.
Figure 39. Configuring the EasyMesh function for a main device. The WISP Repeater mode.
Page 47 of 233
To Next Page
Loading...
