D-Link DSL-2640B

Web Configuration
D-Link DSL-2640B User Manual
37
After proper configuration, click Next and the right page appears.
Field Description
Enable NAT
Indicates if NAT is enabled or disabled.
Enable Firewall
Indicates if the firewall is enabled or
disabled.
Enable IGMP Multicast
Indicates if IGMP multicast is enabled
or disabled.
Enable MLD Multicast Proxy
Indicates if MLD is enabled or
disabled.
MTU(1-65535)
Indicates if multicast listener discovery
proxy for IPv6 is enabled or disabled.
Back
Click to return to the previous
configuration screen
Next
Click to proceed to the Routing –
Default Gateway window.