D-Link DSL-2640B

Web Configuration
D-Link DSL-2640B User Manual 54
IPv6 LAN Configuration
Field Description
Enable DHCPv6
Server
Select the checkbox to enable the DHCPv6 Server.
WIDE-DHCPv6 is an open-source implementation of
dynamic host configuration protocol for IPv6 (DHCPv6).
Enable RADVD
Select the checkbox to enable RADVD. The router
advertisement daemon (RADVD) is run by Linux or BSD
systems acting as IPv6 routers. It sends router advertisement
messages, specified by RFC2461, to a local Ethernet LAN
periodically and when requested by a node sending a router
solicitation message. These messages are required for IPv6
stateless auto-configuration.
Delegated from
WAN
Select the Delegated from WAN radio button to have the IPv6
site prefix configuration type delegated from a WAN interface
selected from the drop-down list.
Static Select Static to specify a static IPv6 site prefix.
Site Prefix Enter the IPv6 site prefix.
Site Prefix
Length
Specify the length of the IPv6 site prefix.
Enable MLD
Snooping
Select the checkbox to enable multicast listener discovery
snooping.
Save/Apply Click to save your changes.