Web Configuration
D-Link DSL-2640B User Manual 48
Internet Connection Type - IP over ATM (IPoA)
Click Add to add the WAN interface.
VPI: Virtual path between two points in an ATM network. Its valid value range
is from 0 to 255.
VCI: Virtual channel between two points in an ATM network. Its valid value
range is from 32 to 65535 (1 to 31 are reserved for known protocols).
Encapsulation Mode: You can select it from the drop-down list.
Service Category: You can select it from the drop-down list.
Enable Quality Of Service: Enable or disable QoS.
To Next Page
Loading...
