D-Link DSL-2640T User Manual

DSL-2640T ADSL 2+ Router User Guide
10
Rear Panel Connections
All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router.
Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the
reset button).
Connect network cables:
1. Insert the ADSL (telephone) cable included with the Router into the ADSL port and then connect the cable to
your telephone line.
2. Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the Router and the other
end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
Ethernet Port
Use the Ethernet port
to connect the Router
to your Ethernet LAN
or com
p
uter
Power Insert
Use the adapter
shipped with the
Router to connect to
power source
ADSL Port
Use the ADSL cable to
connect to the your telephone
line (RJ-11 port)

D-Link DSL-2640T Specifications

General

Brand	D-Link
Model	DSL-2640T
Category	Wireless Router
Language	English