DSL-2640T ADSL 2+ Router User Guide
47
DHCP
The DHCP server is enabled by default for the Router’s Ethernet LAN interface. DHCP service will supply IP settings
to workstations configured to automatically obtain IP settings that are connected to the Router though the Ethernet port.
When the Router is used for DHCP it becomes the default gateway for DHCP client connected to it. Keep in mind that
if you change the IP address of the Router the range of IP addresses in the pool used for DHCP on the LAN will also be
changed. The IP address pool can be up to 253 IP addresses.
DHCP Settings window
To display the DHCP Settings window, click the DHCP button in the Home directory. Any active DHCP Clients
appear at the bottom of the window in the DHCP Clients List. The IP address and MAC address for active DHCP
clients are displayed in the list.
To Next Page
Loading...
Need help?
General
