EasyManuals Logo
Home>D-Link>Wireless Router>DSL-2640T

D-Link DSL-2640T User Manual

D-Link DSL-2640T
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
DSL-2640T ADSL 2+ Router User Guide
1
About This User Guide
This user’s guide provides instructions on how to install the DSL-2640T ADSL 2+ Router and use it to provide Internet
access for an Ethernet network or single computer.
If you are using a computer with a functioning Ethernet port, the quickest and easiest way to set up the DSL-2640T is to
follow the instructions provided in the Quick Installation Guide.
Before You Start
Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have all the
necessary information and equipment on hand before beginning the installation.
Installation Overview
The procedure to install the Router can be described in general terms in the following steps:
1. Gather information and equipment needed to install the device. Before you begin the actual installation make
sure you have all the necessary information and equipment.
2. Install the hardware, connect the cables to the device, and connect the power adapter.
3. Check the IP settings on your computer and change them if necessary so the computer can access the web-
based software built into the Router.
4. Use the web-based management software to configure the device to suit the requirements of your ADSL
service and requirements of your local network
.
Setup Wizard
Many users will be able to configure all the settings necessary to use the DSL-2640T with the Setup Wizard. For ADSL
connections that use PPPoE or PPPoA connections, the simplest way to set up the DSL-2640T is to use the Setup
Wizard to configure the Internet connection. Once you access the web interface used to configure the device, just
launch the Setup Wizard to configure your Internet connection.
Packing List
Open the shipping carton and carefully remove all items. Make sure that you have the items listed here.
One DSL-2640T ADSL Ethernet Router
One CD-ROM containing the User’s Guide and Quick Installation Guide
One twisted-pair telephone cable used for ADSL connection
One straight-through Ethernet cable
One AC power adapter suitable for your electric service
One Quick Installation Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-2640T and is the answer not in the manual?

D-Link DSL-2640T Specifications

General IconGeneral
BrandD-Link
ModelDSL-2640T
CategoryWireless Router
LanguageEnglish

Related product manuals