DSL-2640T ADSL 2+ Router User Guide
46
LAN
You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default
settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router is
the base address used for DHCP. In order to use the Router for DHCP on your LAN, the IP address pool used for DHCP
must be compatible with the IP address of the Router. The IP addresses available in the DHCP IP address pool will
change automatically if you change the IP address of the Router. See the next section for information on DHCP setup.
To access the Management IP window, click the LAN button in the Home directory.
Management IP window
To change the LAN IP Address or Subnet Mask, type in the desired values and click the Apply button. Your web
browser should automatically be redirected to the new IP address. You will asked to login again to the Router’s web
manager.
To Next Page
Loading...
Need help?
General
