DSL-2640T ADSL 2+ Router User Guide
73
ATM VCC
The ATM VC Setting window is used to configure the WAN connection. If you are using multiple PVCs, you can
change the configuration of any PVC in this window. To create new or additional PVCs, read the section on Multiple
PVCs on page 53.
This window can be used as an alternative to configure the same settings found on the WAN Settings window in the
Home directory.
ATM VC Setting menu
To configure an existing PVC configuration set, click the corresponding notepad icon in the right-hand column of the
ATM VCs List. The PVCs current settings appear above in the entry fields of the ATM VC Setting window. Configure
the appropriate settings and click the Apply button to put the new settings into effect.
To Next Page
Loading...
Need help?
General
