DSL-2640T ADSL 2+ Router User Guide
27
Wireless
To configure the Router’s basic configuration settings without running the Setup Wizard, you can access the windows
used to configure Wireless, WAN, LAN, DHCP, DNS, and Dynamic DNS settings directly from the Home directory.
To access the Wireless Settings window, click on the Wireless link button on the left side of the first window that
appears when you successfully access the web manager.
Wireless Settings menu – No Security
For Basic Wireless LAN operation with no Securtiy settings, follow the steps:
1. Click the Enable AP box to allow the router to operate in the wireless environment.
2. The SSID identifies members of the Service Set. Accept the default name or change it to something else. If the
default SSID is changed, all other devices on the wireless network must use the same SSID.
3. What channels are available for use by the access point depends on the local regulatory environment.
Remember that all devices communicating with the device must use the same channel (and use the same SSID).
Use the drop-down menu to select the Channel used for your 802.11g wireless LAN. The wireless channel
number is available from your Internet Service Provider (ISP).
4. The VLAN ID and Priority settings are optional settings. If your network supports VLANs or QoS Priority
(IEEE 802.11p), type in the appropriate values here.
5. If network Security is not used, click to select None, then click Apply.
Note
VLAN ID and Priority settings do not need to be configured in order to use the Wireless Access Point.
To Next Page
Loading...
Need help?
General
